What is the Best Way to Protect PCBs?

Have you ever considered how circuit boards can sit around in contact with fluids for hours on end even at elevated temperatures?  Think of automotive printed circuit boards (PCBs). They’re a good example of how such delicate electronic boards survive...

Choosing an LED Curing System Over a Traditional Spot-Curing System

Why would you use a BlueWave® QX4® LED light-curing system instead of a traditional spot-cure system with a multi-pole lightguide?

The BlueWave® QX4® is unique in the fact that each of the four LED heads can be a different wavelength and controlled...

3 Ways to Simplify Dispensing Equipment Selection

Obtaining a proper light-cure begins long before you turn on your conveyor system or spot curing lamp. A successful light-curing process begins with selecting the right dispensing equipment for your needs, as outlined in our latest white paper, ...

How Can Light-Curable Materials Benefit Your Manufacturing Process Controls?

Good process controls help manufacturers turn out the best version of their products and have fewer headaches along the way. In our latest white paper, we explore the benefits of using light-curable materials in the manufacturing process, and what these...

Searching for a Toll Manufacturing Partner? Remember the 3 C’s

Identifying the manufacturer that can help your organization reach its full production and sales potential is a crucial step toward expanding your business. The complexity of the oligomers, coatings, and chemical manufacturing industry, however, can...

Speed Up Your Process and Safeguard Against Incomplete Cures with Encompass® Technology

Dymax understands the pressure placed on manufacturers to keep pace with changing technologies in industries like medical device assembly, consumer electronics design, and aerospace and defense. Routine manufacturing procedures such as adhesive cure...

Ideal Bond Gap Sizes for Tube Set and Catheter Bonding Applications

 We have an application in which we are bonding multiple tubes into a polycarbonate substrate. Right now we have several bonds including: bonding a PVC tube as a pocket fit into polycarbonate, bonding a polyurethane tube as a pocket fit into...

Heating Dymax Oligomers

We heat Bomar® BR-582, BR-3741AB, and BR-7432GB oligomers in a hot box set at 140°F overnight to warm them enough to process. Is this a safe temperature to heat these products to? If not, what is the maximum temperature to which we can safely heat these...

Will Autoclaving Melt Medical Device Adhesives?

What type of medical device adhesive will bond metals/plastics and will melt when it is in an autoclave sterilization? That is, we need the adhesive to NOT survive the autoclave sterilization.

Chemical Compatibility of 190-M Adhesive

We currently use 190-M for sealing epoxy-potted polypropylene fibers. What is the chemical compatibility of Dymax 190-M to aqueous Sulfuric acid at 40% concentration and Hydrochloric acid at the same concentration? If the 190-M information is not...

Recent Posts